--- title: "List all application fee refunds" method: GET path: "/v1/application_fees/{id}/refunds" --- # List all application fee refunds `GET /v1/application_fees/{id}/refunds` You can see a list of the refunds belonging to a specific application fee. Note that the 10 most recent refunds are always available by default on the application fee object. If you need more than those 10, you can use this API method and the `limit` and `starting_after` parameters to page through additional refunds. ## Path parameters - `id` string, required ## Query parameters - `ending_before` string - `expand` string[] - `limit` integer - `starting_after` string ## Response `200` Successful response. - object - `data` FeeRefund[], required — Details about each object. - `amount` integer, required — Amount, in cents (or local equivalent). - `balance_transaction` union — Balance transaction that describes the impact on your account balance. - string - BalanceTransaction — Balance transactions represent funds moving through your Stripe account. Stripe creates them for every type of transaction that enters or leaves your Stripe account balance. Related guide: [Balance transaction types](https://docs.stripe.com/reports/balance-transaction-types) - `amount` integer, required — Gross amount of this transaction (in cents (or local equivalent)). A positive value represents funds charged to another party, and a negative value represents funds sent to another party. - `available_on` integer, required — The date that the transaction's net funds become available in the Stripe balance. - `balance_type` 'issuing' | 'payments' | 'refund_and_dispute_prefunding' | 'risk_reserved', required — The balance that this transaction impacts. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `exchange_rate` number, nullable — If applicable, this transaction uses an exchange rate. If money converts from currency A to currency B, then the `amount` in currency A, multiplied by the `exchange_rate`, equals the `amount` in currency B. For example, if you charge a customer 10.00 EUR, the PaymentIntent's `amount` is `1000` and `currency` is `eur`. If this converts to 12.34 USD in your Stripe account, the BalanceTransaction's `amount` is `1234`, its `currency` is `usd`, and the `exchange_rate` is `1.234`. - `fee` integer, required — Fees (in cents (or local equivalent)) paid for this transaction. Represented as a positive integer when assessed. - `fee_details` Fee[], required — Detailed breakdown of fees (in cents (or local equivalent)) paid for this transaction. - `amount` integer, required — Amount of the fee, in cents. - `application` string, nullable — ID of the Connect application that earned the fee. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `type` string, required — Type of the fee, one of: `application_fee`, `payment_method_passthrough_fee`, `stripe_fee`, `tax`, or `withheld_tax`. - `id` string, required — Unique identifier for the object. - `net` integer, required — Net impact to a Stripe balance (in cents (or local equivalent)). A positive value represents incrementing a Stripe balance, and a negative value decrementing a Stripe balance. You can calculate the net impact of a transaction on a balance by `amount` - `fee` - `object` 'balance_transaction', required — String representing the object's type. Objects of the same type share the same value. - `reporting_category` string, required — Learn more about how [reporting categories](https://stripe.com/docs/reports/reporting-categories) can help you understand balance transactions from an accounting perspective. - `source` union — This transaction relates to the Stripe object. - string - ApplicationFee - `account` union, required — ID of the Stripe account this fee was taken from. - … - `amount` integer, required — Amount earned, in cents (or local equivalent). - `amount_refunded` integer, required — Amount in cents (or local equivalent) refunded (can be less than the amount attribute on the fee if a partial refund was issued) - `application` union, required — ID of the Connect application that earned the fee. - … - `balance_transaction` union — Balance transaction that describes the impact of this collected application fee on your account balance (not including refunds). - … - `charge` union, required — ID of the charge that the application fee was taken from. - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `fee_source` PlatformEarningFeeSource - … - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`. - `object` 'application_fee', required — String representing the object's type. Objects of the same type share the same value. - `originating_transaction` union — ID of the corresponding charge on the platform account, if this fee was the result of a charge using the `destination` parameter. - … - `refunded` boolean, required — Whether the fee has been fully refunded. If the fee is only partially refunded, this attribute will still be false. - `refunds` object, required — A list of refunds that have been applied to the fee. - … - Charge — The `Charge` object represents a single attempt to move money into your Stripe account. PaymentIntent confirmation is the most common way to create Charges, but [Account Debits](https://docs.stripe.com/connect/account-debits) may also create Charges. Some legacy payment flows create Charges directly, which is not recommended for new integrations. - `amount` integer, required — Amount intended to be collected by this payment. A positive integer representing how much to charge in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal) (e.g., 100 cents to charge $1.00 or 100 to charge ¥100, a zero-decimal currency). The minimum amount is $0.50 US or [equivalent in charge currency](https://docs.stripe.com/currencies#minimum-and-maximum-charge-amounts). The amount value supports up to eight digits (e.g., a value of 99999999 for a USD charge of $999,999.99). - `amount_captured` integer, required — Amount in cents (or local equivalent) captured (can be less than the amount attribute on the charge if a partial capture was made). - `amount_refunded` integer, required — Amount in cents (or local equivalent) refunded (can be less than the amount attribute on the charge if a partial refund was issued). - `application` union — ID of the Connect application that created the charge. - … - `application_fee` union — The application fee (if any) for the charge. [See the Connect documentation](https://docs.stripe.com/connect/direct-charges#collect-fees) for details. - … - `application_fee_amount` integer, nullable — The amount of the application fee (if any) requested for the charge. [See the Connect documentation](https://docs.stripe.com/connect/direct-charges#collect-fees) for details. - `balance_transaction` union — ID of the balance transaction that describes the impact of this charge on your account balance (not including refunds or disputes). - … - `billing_details` BillingDetails, required - … - `calculated_statement_descriptor` string, nullable — The full statement descriptor that is passed to card networks, and that is displayed on your customers' credit card and bank statements. Allows you to see what the statement descriptor looks like after the static and dynamic portions are combined. This value only exists for card payments. - `captured` boolean, required — If the charge was created without capturing, this Boolean represents whether it is still uncaptured or has since been captured. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `customer` union — ID of the customer this charge is for if one exists. - … - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `disputed` boolean, required — Whether the charge has been disputed. - `failure_balance_transaction` union — ID of the balance transaction that describes the reversal of the balance on your account due to payment failure. - … - `failure_code` string, nullable — Error code explaining reason for charge failure if available (see [the errors section](https://docs.stripe.com/error-codes) for a list of codes). - `failure_message` string, nullable — Message to user further explaining reason for charge failure if available. - `fraud_details` ChargeFraudDetails - … - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`. - `metadata` object, required — Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'charge', required — String representing the object's type. Objects of the same type share the same value. - `on_behalf_of` union — The account (if any) the charge was made on behalf of without triggering an automatic transfer. See the [Connect documentation](https://docs.stripe.com/connect/separate-charges-and-transfers) for details. - … - `outcome` ChargeOutcome - … - `paid` boolean, required — `true` if the charge succeeded, or was successfully authorized for later capture. - `payment_intent` union — ID of the PaymentIntent associated with this charge, if one exists. - … - `payment_method` string, nullable — ID of the payment method used in this charge. - `payment_method_details` PaymentMethodDetails - … - `presentment_details` PaymentFlowsPaymentIntentPresentmentDetails - … - `radar_options` RadarRadarOptions — Options to configure Radar. See [Radar Session](https://docs.stripe.com/radar/radar-session) for more information. - … - `receipt_email` string, nullable — This is the email address that the receipt for this charge was sent to. - `receipt_number` string, nullable — This is the transaction number that appears on email receipts sent for this charge. This attribute will be `null` until a receipt has been sent. - `receipt_url` string, nullable — This is the URL to view the receipt for this charge. The receipt is kept up-to-date to the latest state of the charge, including any refunds. If the charge is for an Invoice, the receipt will be stylized as an Invoice receipt. - `refunded` boolean, required — Whether the charge has been fully refunded. If the charge is only partially refunded, this attribute will still be false. - `refunds` object, nullable — A list of refunds that have been applied to the charge. - … - `review` union — ID of the review associated with this charge if one exists. - … - `shipping` Shipping - … - `source_transfer` union — The transfer ID which created this charge. Only present if the charge came from another Stripe account. [See the Connect documentation](https://docs.stripe.com/connect/destination-charges) for details. - … - `statement_descriptor` string, nullable — For a non-card charge, text that appears on the customer's statement as the statement descriptor. This value overrides the account's default statement descriptor. For information about requirements, including the 22-character limit, see [the Statement Descriptor docs](https://docs.stripe.com/get-started/account/statement-descriptors). For a card charge, this value is ignored unless you don't specify a `statement_descriptor_suffix`, in which case this value is used as the suffix. - `statement_descriptor_suffix` string, nullable — Provides information about a card charge. Concatenated to the account's [statement descriptor prefix](https://docs.stripe.com/get-started/account/statement-descriptors#static) to form the complete statement descriptor that appears on the customer's statement. If the account has no prefix value, the suffix is concatenated to the account's statement descriptor. - `status` 'failed' | 'pending' | 'succeeded', required — The status of the payment is either `succeeded`, `pending`, or `failed`. - `transfer` union — ID of the transfer to the `destination` account (only applicable if the charge was created using the `destination` parameter). - … - `transfer_data` ChargeTransferData - … - `transfer_group` string, nullable — A string that identifies this transaction as part of a group. See the [Connect documentation](https://docs.stripe.com/connect/separate-charges-and-transfers#transfer-options) for details. - ConnectCollectionTransfer - `amount` integer, required — Amount transferred, in cents (or local equivalent). - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `destination` union, required — ID of the account that funds are being collected for. - … - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`. - `object` 'connect_collection_transfer', required — String representing the object's type. Objects of the same type share the same value. - CustomerCashBalanceTransaction — Customers with certain payments enabled have a cash balance, representing funds that were paid by the customer to a merchant, but have not yet been allocated to a payment. Cash Balance Transactions represent when funds are moved into or out of this balance. This includes funding by the customer, allocation to payments, and refunds to the customer. - `adjusted_for_overdraft` CustomerBalanceResourceCashBalanceTransactionResourceAdjustedForOverdraft - … - `applied_to_payment` CustomerBalanceResourceCashBalanceTransactionResourceAppliedToPaymentTransaction - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `customer` union, required — The customer whose available cash balance changed as a result of this transaction. - … - `customer_account` string, nullable — The ID of an Account representing a customer whose available cash balance changed as a result of this transaction. - `ending_balance` integer, required — The total available cash balance for the specified currency after this transaction was applied. Represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). - `funded` CustomerBalanceResourceCashBalanceTransactionResourceFundedTransaction - … - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`. - `net_amount` integer, required — The amount by which the cash balance changed, represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). A positive value represents funds being added to the cash balance, a negative value represents funds being removed from the cash balance. - `object` 'customer_cash_balance_transaction', required — String representing the object's type. Objects of the same type share the same value. - `refunded_from_payment` CustomerBalanceResourceCashBalanceTransactionResourceRefundedFromPaymentTransaction - … - `transferred_to_balance` CustomerBalanceResourceCashBalanceTransactionResourceTransferredToBalance - … - `type` 'adjusted_for_overdraft' | 'applied_to_payment' | 'funded' | 'funding_reversed' | 'refunded_from_payment' | 'return_canceled' | 'return_initiated' | 'transferred_to_balance' | 'unapplied_from_payment', required — The type of the cash balance transaction. New types may be added in future. See [Customer Balance](https://docs.stripe.com/payments/customer-balance#types) to learn more about these types. - `unapplied_from_payment` CustomerBalanceResourceCashBalanceTransactionResourceUnappliedFromPaymentTransaction - … - Dispute — A dispute occurs when a customer questions your charge with their card issuer. When this happens, you have the opportunity to respond to the dispute with evidence that shows that the charge is legitimate. Related guide: [Disputes and fraud](https://docs.stripe.com/disputes) - `amount` integer, required — Disputed amount. Usually the amount of the charge, but it can differ (usually because of currency fluctuation or because only part of the order is disputed). - `balance_transactions` BalanceTransaction[], required — List of zero, one, or two balance transactions that show funds withdrawn and reinstated to your Stripe account as a result of this dispute. - `charge` union, required — ID of the charge that's disputed. - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `enhanced_eligibility_types` string[], required — List of eligibility types that are included in `enhanced_evidence`. - `evidence` DisputeEvidence, required - … - `evidence_details` DisputeEvidenceDetails, required - … - `id` string, required — Unique identifier for the object. - `is_charge_refundable` boolean, required — If true, it's still possible to refund the disputed payment. After the payment has been fully refunded, no further funds are withdrawn from your Stripe account as a result of this dispute. - `livemode` boolean, required — If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`. - `metadata` object, required — Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'dispute', required — String representing the object's type. Objects of the same type share the same value. - `payment_intent` union — ID of the PaymentIntent that's disputed. - … - `payment_method_details` DisputePaymentMethodDetails - … - `reason` string, required — Reason given by cardholder for dispute. Possible values are `bank_cannot_process`, `check_returned`, `credit_not_processed`, `customer_initiated`, `debit_not_authorized`, `duplicate`, `fraudulent`, `general`, `incorrect_account_details`, `insufficient_funds`, `noncompliant`, `product_not_received`, `product_unacceptable`, `subscription_canceled`, or `unrecognized`. Learn more about [dispute reasons](https://docs.stripe.com/disputes/categories). - `status` 'lost' | 'needs_response' | 'prevented' | 'under_review' | 'warning_closed' | 'warning_needs_response' | 'warning_under_review' | 'won', required — The current status of a dispute. Possible values include:`warning_needs_response`, `warning_under_review`, `warning_closed`, `needs_response`, `under_review`, `won`, `lost`, or `prevented`. - FeeRefund — recursive - IssuingAuthorization — When an [issued card](https://docs.stripe.com/issuing) is used to make a purchase, an Issuing `Authorization` object is created. [Authorizations](https://docs.stripe.com/issuing/purchases/authorizations) must be approved for the purchase to be completed successfully. Related guide: [Issued card authorizations](https://docs.stripe.com/issuing/purchases/authorizations) - `amount` integer, required — The total amount that was authorized or rejected. This amount is in `currency` and in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). `amount` should be the same as `merchant_amount`, unless `currency` and `merchant_currency` are different. - `amount_details` IssuingAuthorizationAmountDetails - … - `approved` boolean, required — Whether the authorization has been approved. - `authorization_method` 'chip' | 'contactless' | 'keyed_in' | 'online' | 'swipe', required — How the card details were provided. - `balance_transactions` BalanceTransaction[], required — List of balance transactions associated with this authorization. - `card` IssuingCard, required — You can [create physical or virtual cards](https://docs.stripe.com/issuing) that are issued to cardholders. - … - `card_presence` 'not_present' | 'present', nullable — Whether the card was present at the point of sale for the authorization. - `cardholder` union — The cardholder to whom this authorization belongs. - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — The currency of the cardholder. This currency can be different from the currency presented at authorization and the `merchant_currency` field on this authorization. Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `fleet` IssuingAuthorizationFleetData - … - `fraud_challenges` IssuingAuthorizationFraudChallenge[], nullable — Fraud challenges sent to the cardholder, if this authorization was declined for fraud risk reasons. - … - `fuel` IssuingAuthorizationFuelData - … - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`. - `merchant_amount` integer, required — The total amount that was authorized or rejected. This amount is in the `merchant_currency` and in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). `merchant_amount` should be the same as `amount`, unless `merchant_currency` and `currency` are different. - `merchant_currency` string, currency, required — The local currency that was presented to the cardholder for the authorization. This currency can be different from the cardholder currency and the `currency` field on this authorization. Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `merchant_data` IssuingAuthorizationMerchantData, required - … - `metadata` object, required — Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `network_data` IssuingAuthorizationNetworkData - … - `object` 'issuing.authorization', required — String representing the object's type. Objects of the same type share the same value. - `pending_request` IssuingAuthorizationPendingRequest - … - `request_history` IssuingAuthorizationRequest[], required — History of every time a `pending_request` authorization was approved/declined, either by you directly or by Stripe (e.g. based on your spending_controls). If the merchant changes the authorization by performing an incremental authorization, you can look at this field to see the previous requests for the authorization. This field can be helpful in determining why a given authorization was approved/declined. - … - `status` 'closed' | 'expired' | 'pending' | 'reversed', required — The current status of the authorization in its lifecycle. - `token` union — [Token](https://docs.stripe.com/api/issuing/tokens/object) object used for this authorization. If a network token was not used for this authorization, this field will be null. - … - `transactions` IssuingTransaction[], required — List of [transactions](https://docs.stripe.com/api/issuing/transactions) associated with this authorization. - … - `treasury` IssuingAuthorizationTreasury - … - `verification_data` IssuingAuthorizationVerificationData, required - … - `verified_by_fraud_challenge` boolean, nullable — Whether the authorization bypassed fraud risk checks because the cardholder has previously completed a fraud challenge on a similar high-risk authorization from the same merchant. - `wallet` string, nullable — The digital wallet used for this transaction. One of `apple_pay`, `google_pay`, or `samsung_pay`. Will populate as `null` when no digital wallet was utilized. - IssuingDispute — As a [card issuer](https://docs.stripe.com/issuing), you can dispute transactions that the cardholder does not recognize, suspects to be fraudulent, or has other issues with. Related guide: [Issuing disputes](https://docs.stripe.com/issuing/purchases/disputes) - `amount` integer, required — Disputed amount in the card's currency and in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). Usually the amount of the `transaction`, but can differ (usually because of currency fluctuation). - `balance_transactions` BalanceTransaction[], nullable — List of balance transactions associated with the dispute. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — The currency the `transaction` was made in. - `evidence` IssuingDisputeEvidence, required - … - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`. - `loss_reason` 'cardholder_authentication_issuer_liability' | 'eci5_token_transaction_with_tavv' | 'excess_disputes_in_timeframe' | 'has_not_met_the_minimum_dispute_amount_requirements' | 'invalid_duplicate_dispute' | 'invalid_incorrect_amount_dispute' | 'invalid_no_authorization' | 'invalid_use_of_disputes' | 'merchandise_delivered_or_shipped' | 'merchandise_or_service_as_described' | 'not_cancelled' | 'other' | 'refund_issued' | 'submitted_beyond_allowable_time_limit' | 'transaction_3ds_required' | 'transaction_approved_after_prior_fraud_dispute' | 'transaction_authorized' | 'transaction_electronically_read' | 'transaction_qualifies_for_visa_easy_payment_service' | 'transaction_unattended' — The enum that describes the dispute loss outcome. If the dispute is not lost, this field will be absent. New enum values may be added in the future, so be sure to handle unknown values. - `metadata` object, required — Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'issuing.dispute', required — String representing the object's type. Objects of the same type share the same value. - `status` 'expired' | 'lost' | 'submitted' | 'unsubmitted' | 'won', required — Current status of the dispute. - `transaction` union, required — The transaction being disputed. - … - `treasury` IssuingDisputeTreasury - … - IssuingTransaction — Any use of an [issued card](https://docs.stripe.com/issuing) that results in funds entering or leaving your Stripe account, such as a completed purchase or refund, is represented by an Issuing `Transaction` object. Related guide: [Issued card transactions](https://docs.stripe.com/issuing/purchases/transactions) - `amount` integer, required — The transaction amount, which will be reflected in your balance. This amount is in your currency and in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). - `amount_details` IssuingTransactionAmountDetails - … - `authorization` union — The `Authorization` object that led to this transaction. - … - `balance_transaction` union — ID of the [balance transaction](https://docs.stripe.com/api/balance_transactions) associated with this transaction. - … - `card` union, required — The card used to make this transaction. - … - `cardholder` union — The cardholder to whom this transaction belongs. - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `dispute` union — If you've disputed the transaction, the ID of the dispute. - … - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`. - `merchant_amount` integer, required — The amount that the merchant will receive, denominated in `merchant_currency` and in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). It will be different from `amount` if the merchant is taking payment in a different currency. - `merchant_currency` string, currency, required — The currency with which the merchant is taking payment. - `merchant_data` IssuingAuthorizationMerchantData, required - … - `metadata` object, required — Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `network_data` IssuingTransactionNetworkData - … - `object` 'issuing.transaction', required — String representing the object's type. Objects of the same type share the same value. - `purchase_details` IssuingTransactionPurchaseDetails - … - `token` union — [Token](https://docs.stripe.com/api/issuing/tokens/object) object used for this transaction. If a network token was not used for this transaction, this field will be null. - … - `treasury` IssuingTransactionTreasury - … - `type` 'capture' | 'refund', required — The nature of the transaction. - `wallet` 'apple_pay' | 'google_pay' | 'samsung_pay', nullable — The digital wallet used for this transaction. One of `apple_pay`, `google_pay`, or `samsung_pay`. - Payout — A `Payout` object is created when you receive funds from Stripe, or when you initiate a payout to either a bank account or debit card of a [connected Stripe account](/docs/connect/bank-debit-card-payouts). You can retrieve individual payouts, and list all payouts. Payouts are made on [varying schedules](/docs/connect/manage-payout-schedule), depending on your country and industry. Related guide: [Receiving payouts](https://docs.stripe.com/payouts) - `amount` integer, required — The amount (in cents (or local equivalent)) that transfers to your bank account or debit card. - `application_fee` union — The application fee (if any) for the payout. [See the Connect documentation](https://docs.stripe.com/connect/instant-payouts#monetization-and-fees) for details. - … - `application_fee_amount` integer, nullable — The amount of the application fee (if any) requested for the payout. [See the Connect documentation](https://docs.stripe.com/connect/instant-payouts#monetization-and-fees) for details. - `arrival_date` integer, required — Date that you can expect the payout to arrive in the bank. This factors in delays to account for weekends or bank holidays. - `automatic` boolean, required — Returns `true` if the payout is created by an [automated payout schedule](https://docs.stripe.com/payouts#payout-schedule) and `false` if it's [requested manually](https://stripe.com/docs/payouts#manual-payouts). - `balance_transaction` union — ID of the balance transaction that describes the impact of this payout on your account balance. - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `destination` union — ID of the bank account or card the payout is sent to. - … - `failure_balance_transaction` union — If the payout fails or cancels, this is the ID of the balance transaction that reverses the initial balance transaction and returns the funds from the failed payout back in your balance. - … - `failure_code` string, nullable — Error code that provides a reason for a payout failure, if available. View our [list of failure codes](https://docs.stripe.com/api#payout_failures). - `failure_message` string, nullable — Message that provides the reason for a payout failure, if available. - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`. - `metadata` object, nullable — Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `method` string, required — The method used to send this payout, which can be `standard` or `instant`. `instant` is supported for payouts to debit cards and bank accounts in certain countries. Learn more about [bank support for Instant Payouts](https://stripe.com/docs/payouts/instant-payouts-banks). - `object` 'payout', required — String representing the object's type. Objects of the same type share the same value. - `original_payout` union — If the payout reverses another, this is the ID of the original payout. - … - `payout_method` string, nullable — ID of the v2 FinancialAccount the funds are sent to. - `reconciliation_status` 'completed' | 'in_progress' | 'not_applicable', required — If `completed`, you can use the [Balance Transactions API](https://docs.stripe.com/api/balance_transactions/list#balance_transaction_list-payout) to list all balance transactions that are paid out in this payout. - `reversed_by` union — If the payout reverses, this is the ID of the payout that reverses this payout. - … - `source_type` string, required — The source balance this payout came from, which can be one of the following: `card`, `fpx`, or `bank_account`. - `statement_descriptor` string, nullable — Extra information about a payout that displays on the user's bank statement. - `status` string, required — Current status of the payout: `paid`, `pending`, `in_transit`, `canceled` or `failed`. A payout is `pending` until it's submitted to the bank, when it becomes `in_transit`. The status changes to `paid` if the transaction succeeds, or to `failed` or `canceled` (within 5 business days). Some payouts that fail might initially show as `paid`, then change to `failed`. - `trace_id` PayoutsTraceId - … - `type` 'bank_account' | 'card', required — Can be `bank_account` or `card`. - Refund — Refund objects allow you to refund a previously created charge that isn't refunded yet. Funds are refunded to the credit or debit card that's initially charged. Related guide: [Refunds](https://docs.stripe.com/refunds) - `amount` integer, required — Amount, in cents (or local equivalent). - `balance_transaction` union — Balance transaction that describes the impact on your account balance. - … - `charge` union — ID of the charge that's refunded. - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `customer` union — ID of the customer of this refund. - … - `customer_account` string, nullable — ID of the account of this refund. - `description` string — An arbitrary string attached to the object. You can use this for displaying to users (available on non-card refunds only). - `destination_details` RefundDestinationDetails - … - `failure_balance_transaction` union — After the refund fails, this balance transaction describes the adjustment made on your account balance that reverses the initial balance transaction. - … - `failure_reason` string — Provides the reason for the refund failure. Possible values are: `lost_or_stolen_card`, `expired_or_canceled_card`, `charge_for_pending_refund_disputed`, `insufficient_funds`, `declined`, `merchant_request`, or `unknown`. - `id` string, required — Unique identifier for the object. - `instructions_email` string — For payment methods without native refund support (for example, Konbini, PromptPay), provide an email address for the customer to receive refund instructions. - `metadata` object, nullable — Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `next_action` RefundNextAction - … - `object` 'refund', required — String representing the object's type. Objects of the same type share the same value. - `payment_intent` union — ID of the PaymentIntent that's refunded. - … - `payment_method` union — ID of the payment method associated with this refund. - … - `pending_reason` 'charge_pending' | 'insufficient_funds' | 'processing' — Provides the reason for why the refund is pending. Possible values are: `processing`, `insufficient_funds`, or `charge_pending`. - `presentment_details` PaymentFlowsPaymentIntentPresentmentDetails - … - `reason` 'duplicate' | 'expired_uncaptured_charge' | 'fraudulent' | 'requested_by_customer', nullable — Reason for the refund, which is either user-provided (`duplicate`, `fraudulent`, or `requested_by_customer`) or generated by Stripe internally (`expired_uncaptured_charge`). - `receipt_number` string, nullable — This is the transaction number that appears on email receipts sent for this refund. - `source_transfer_reversal` union — The transfer reversal that's associated with the refund. Only present if the charge came from another Stripe account. - … - `status` string, nullable — Status of the refund. This can be `pending`, `requires_action`, `succeeded`, `failed`, or `canceled`. Learn more about [failed refunds](https://docs.stripe.com/refunds#failed-refunds). - `transfer_reversal` union — This refers to the transfer reversal object if the accompanying transfer reverses. This is only applicable if the charge was created using the destination parameter. - … - ReserveTransaction - `amount` integer, required - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `id` string, required — Unique identifier for the object. - `object` 'reserve_transaction', required — String representing the object's type. Objects of the same type share the same value. - TaxDeductedAtSource - `id` string, required — Unique identifier for the object. - `object` 'tax_deducted_at_source', required — String representing the object's type. Objects of the same type share the same value. - `period_end` integer, required — The end of the invoicing period. This TDS applies to Stripe fees collected during this invoicing period. - `period_start` integer, required — The start of the invoicing period. This TDS applies to Stripe fees collected during this invoicing period. - `tax_deduction_account_number` string, required — The TAN that was supplied to Stripe when TDS was assessed - Topup — To top up your Stripe balance, you create a top-up object. You can retrieve individual top-ups, as well as list all top-ups. Top-ups are identified by a unique, random ID. Related guide: [Topping up your platform account](https://docs.stripe.com/connect/top-ups) - `amount` integer, required — Amount transferred. - `balance_transaction` union — ID of the balance transaction that describes the impact of this top-up on your account balance. May not be specified depending on status of top-up. - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `expected_availability_date` integer, nullable — Date the funds are expected to arrive in your Stripe account for payouts. This factors in delays like weekends or bank holidays. May not be specified depending on status of top-up. - `failure_code` string, nullable — Error code explaining reason for top-up failure if available (see [the errors section](/api/errors) for a list of codes). - `failure_message` string, nullable — Message to user further explaining reason for top-up failure if available. - `id` string, required — Unique identifier for the object. - `initiated_by` 'stripe' | 'user', nullable — Indicates whether the top-up was initiated by Stripe or by the user. - `livemode` boolean, required — If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`. - `metadata` object, required — Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'topup', required — String representing the object's type. Objects of the same type share the same value. - `payment_method` union — The ID of a PaymentMethod representing the payment method used for the top-up. A PaymentMethod of type `us_bank_account` can be used. - … - `payment_method_options` TopupResourcePaymentMethodOptions - … - `source` Source — `Source` objects allow you to accept a variety of payment methods. They represent a customer's payment instrument, and can be used with the Stripe API just like a `Card` object: once chargeable, they can be charged, or can be attached to customers. Stripe doesn't recommend using the deprecated [Sources API](https://docs.stripe.com/api/sources). We recommend that you adopt the [PaymentMethods API](https://docs.stripe.com/api/payment_methods). This newer API provides access to our latest features and payment method types. Related guides: [Sources API](https://docs.stripe.com/sources) and [Sources & Customers](https://docs.stripe.com/sources/customers). - … - `statement_descriptor` string, nullable — Extra information about a top-up. This will appear on your source's bank statement. It must contain at least one letter. - `status` 'canceled' | 'failed' | 'pending' | 'reversed' | 'succeeded', required — The status of the top-up is either `canceled`, `failed`, `pending`, `reversed`, or `succeeded`. - `transfer_group` string, nullable — A string that identifies this top-up as part of a group. - Transfer — A `Transfer` object is created when you move funds between Stripe accounts as part of Connect. Before April 6, 2017, transfers also represented movement of funds from a Stripe account to a card or bank account. This behavior has since been split out into a [Payout](https://api.stripe.com#payout_object) object, with corresponding payout endpoints. For more information, read about the [transfer/payout split](https://docs.stripe.com/transfer-payout-split). Related guide: [Creating separate charges and transfers](https://docs.stripe.com/connect/separate-charges-and-transfers) - `amount` integer, required — Amount in cents (or local equivalent) to be transferred. - `amount_reversed` integer, required — Amount in cents (or local equivalent) reversed (can be less than the amount attribute on the transfer if a partial reversal was issued). - `balance_transaction` union — Balance transaction that describes the impact of this transfer on your account balance. - … - `created` integer, required — Time that this record of the transfer was first created. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `destination` union — ID of the Stripe account the transfer was sent to. - … - `destination_payment` union — If the destination is a Stripe account, this will be the ID of the payment that the destination account received for the transfer. - … - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`. - `metadata` object, required — Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'transfer', required — String representing the object's type. Objects of the same type share the same value. - `reversals` object, required — A list of reversals that have been applied to the transfer. - … - `reversed` boolean, required — Whether the transfer has been fully reversed. If the transfer is only partially reversed, this attribute will still be false. - `source_transaction` union — ID of the charge that was used to fund the transfer. If null, the transfer was funded from the available balance. - … - `source_type` string — The source balance this transfer came from. One of `card`, `fpx`, or `bank_account`. - `transfer_group` string, nullable — A string that identifies this transaction as part of a group. See the [Connect documentation](https://docs.stripe.com/connect/separate-charges-and-transfers#transfer-options) for details. - TransferReversal — [Stripe Connect](https://docs.stripe.com/connect) platforms can reverse transfers made to a connected account, either entirely or partially, and can also specify whether to refund any related application fees. Transfer reversals add to the platform's balance and subtract from the destination account's balance. Reversing a transfer that was made for a [destination charge](/docs/connect/destination-charges) is allowed only up to the amount of the charge. It is possible to reverse a [transfer_group](https://docs.stripe.com/connect/separate-charges-and-transfers#transfer-options) transfer only if the destination account has enough balance to cover the reversal. Related guide: [Reverse transfers](https://docs.stripe.com/connect/separate-charges-and-transfers#reverse-transfers) - `amount` integer, required — Amount, in cents (or local equivalent). - `balance_transaction` union — Balance transaction that describes the impact on your account balance. - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `destination_payment_refund` union — Linked payment refund for the transfer reversal. - … - `id` string, required — Unique identifier for the object. - `metadata` object, nullable — Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'transfer_reversal', required — String representing the object's type. Objects of the same type share the same value. - `source_refund` union — ID of the refund responsible for the transfer reversal. - … - `transfer` union, required — ID of the transfer that was reversed. - … - `status` string, required — The transaction's net funds status in the Stripe balance, which are either `available` or `pending`. - `type` 'adjustment' | 'advance' | 'advance_funding' | 'anticipation_repayment' | 'application_fee' | 'application_fee_refund' | 'charge' | 'climate_order_purchase' | 'climate_order_refund' | 'connect_collection_transfer' | 'contribution' | 'fee_credit_funding' | 'inbound_transfer' | 'inbound_transfer_reversal' | 'issuing_authorization_hold' | 'issuing_authorization_release' | 'issuing_dispute' | 'issuing_transaction' | 'obligation_outbound' | 'obligation_reversal_inbound' | 'payment' | 'payment_failure_refund' | 'payment_network_reserve_hold' | 'payment_network_reserve_release' | 'payment_refund' | 'payment_reversal' | 'payment_unreconciled' | 'payout' | 'payout_cancel' | 'payout_failure' | 'payout_minimum_balance_hold' | 'payout_minimum_balance_release' | 'refund' | 'refund_failure' | 'reserve_hold' | 'reserve_release' | 'reserve_transaction' | 'reserved_funds' | 'stripe_balance_payment_debit' | 'stripe_balance_payment_debit_reversal' | 'stripe_fee' | 'stripe_fx_fee' | 'tax_fee' | 'tax_fund' | 'topup' | 'topup_reversal' | 'transfer' | 'transfer_cancel' | 'transfer_failure' | 'transfer_refund', required — Transaction type: `tax_fund`, `adjustment`, `advance`, `advance_funding`, `anticipation_repayment`, `application_fee`, `application_fee_refund`, `charge`, `climate_order_purchase`, `climate_order_refund`, `connect_collection_transfer`, `contribution`, `inbound_transfer`, `inbound_transfer_reversal`, `issuing_authorization_hold`, `issuing_authorization_release`, `issuing_dispute`, `issuing_transaction`, `obligation_outbound`, `obligation_reversal_inbound`, `payment`, `payment_failure_refund`, `payment_network_reserve_hold`, `payment_network_reserve_release`, `payment_refund`, `payment_reversal`, `payment_unreconciled`, `payout`, `payout_cancel`, `payout_failure`, `payout_minimum_balance_hold`, `payout_minimum_balance_release`, `refund`, `refund_failure`, `reserve_transaction`, `reserved_funds`, `reserve_hold`, `reserve_release`, `stripe_fee`, `stripe_fx_fee`, `stripe_balance_payment_debit`, `stripe_balance_payment_debit_reversal`, `tax_fee`, `topup`, `topup_reversal`, `transfer`, `transfer_cancel`, `transfer_failure`, `transfer_refund`, or `fee_credit_funding`. Learn more about [balance transaction types and what they represent](https://stripe.com/docs/reports/balance-transaction-types). To classify transactions for accounting purposes, consider `reporting_category` instead. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `fee` union, required — ID of the application fee that was refunded. - string - ApplicationFee - `account` union, required — ID of the Stripe account this fee was taken from. - string - Account — For new integrations, we recommend using the [Accounts v2 API](/api/v2/core/accounts), in place of /v1/accounts and /v1/customers to represent a user. This is an object representing a Stripe account. You can retrieve it to see properties on the account like its current requirements or if the account is enabled to make live charges or receive payouts. For accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts, the properties below are always returned. For accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `stripe`, which includes Standard and Express accounts, some properties are only returned until you create an [Account Link](/api/account_links) or [Account Session](/api/account_sessions) to start Connect Onboarding. Learn about the [differences between accounts](/connect/accounts). - `business_profile` AccountBusinessProfile - … - `business_type` 'company' | 'government_entity' | 'individual' | 'non_profit', nullable — The business type. - `capabilities` AccountCapabilities - … - `charges_enabled` boolean — Whether the account can process charges. - `company` LegalEntityCompany - … - `controller` AccountUnificationAccountController - … - `country` string — The account's country. - `created` integer — Time at which the account was connected. Measured in seconds since the Unix epoch. - `default_currency` string — Three-letter ISO currency code representing the default currency for the account. This must be a currency that [Stripe supports in the account's country](https://stripe.com/docs/payouts). - `details_submitted` boolean — Whether account details have been submitted. Accounts with Stripe Dashboard access, which includes Standard accounts, cannot receive payouts before this is true. Accounts where this is false should be directed to [an onboarding flow](/connect/onboarding) to finish submitting account details. - `email` string, nullable — An email address associated with the account. It's not used for authentication and Stripe doesn't market to this field without explicit approval from the platform. - `external_accounts` object — External accounts (bank accounts and debit cards) currently attached to this account. External accounts are only returned for requests where `controller[is_controller]` is true. - … - `future_requirements` AccountFutureRequirements - … - `groups` AccountGroupMembership - … - `id` string, required — Unique identifier for the object. - `individual` Person — This is an object representing a person associated with a Stripe account. A platform can only access a subset of data in a person for an account where [account.controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `stripe`, which includes Standard and Express accounts, after creating an Account Link or Account Session to start Connect onboarding. See the [Standard onboarding](/connect/standard-accounts) or [Express onboarding](/connect/express-accounts) documentation for information about prefilling information and account onboarding steps. Learn more about [handling identity verification with the API](/connect/handling-api-verification#person-information). - … - `metadata` object — Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'account', required — String representing the object's type. Objects of the same type share the same value. - `payouts_enabled` boolean — Whether the funds in this account can be paid out. - `requirements` AccountRequirements - … - `settings` AccountSettings - … - `tos_acceptance` AccountTosAcceptance - … - `type` 'custom' | 'express' | 'none' | 'standard' — The Stripe account type. Can be `standard`, `express`, `custom`, or `none`. - `amount` integer, required — Amount earned, in cents (or local equivalent). - `amount_refunded` integer, required — Amount in cents (or local equivalent) refunded (can be less than the amount attribute on the fee if a partial refund was issued) - `application` union, required — ID of the Connect application that earned the fee. - string - Application - `id` string, required — Unique identifier for the object. - `name` string, nullable — The name of the application. - `object` 'application', required — String representing the object's type. Objects of the same type share the same value. - `balance_transaction` union — Balance transaction that describes the impact of this collected application fee on your account balance (not including refunds). - string - BalanceTransaction — Balance transactions represent funds moving through your Stripe account. Stripe creates them for every type of transaction that enters or leaves your Stripe account balance. Related guide: [Balance transaction types](https://docs.stripe.com/reports/balance-transaction-types) - `amount` integer, required — Gross amount of this transaction (in cents (or local equivalent)). A positive value represents funds charged to another party, and a negative value represents funds sent to another party. - `available_on` integer, required — The date that the transaction's net funds become available in the Stripe balance. - `balance_type` 'issuing' | 'payments' | 'refund_and_dispute_prefunding' | 'risk_reserved', required — The balance that this transaction impacts. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `exchange_rate` number, nullable — If applicable, this transaction uses an exchange rate. If money converts from currency A to currency B, then the `amount` in currency A, multiplied by the `exchange_rate`, equals the `amount` in currency B. For example, if you charge a customer 10.00 EUR, the PaymentIntent's `amount` is `1000` and `currency` is `eur`. If this converts to 12.34 USD in your Stripe account, the BalanceTransaction's `amount` is `1234`, its `currency` is `usd`, and the `exchange_rate` is `1.234`. - `fee` integer, required — Fees (in cents (or local equivalent)) paid for this transaction. Represented as a positive integer when assessed. - `fee_details` Fee[], required — Detailed breakdown of fees (in cents (or local equivalent)) paid for this transaction. - … - `id` string, required — Unique identifier for the object. - `net` integer, required — Net impact to a Stripe balance (in cents (or local equivalent)). A positive value represents incrementing a Stripe balance, and a negative value decrementing a Stripe balance. You can calculate the net impact of a transaction on a balance by `amount` - `fee` - `object` 'balance_transaction', required — String representing the object's type. Objects of the same type share the same value. - `reporting_category` string, required — Learn more about how [reporting categories](https://stripe.com/docs/reports/reporting-categories) can help you understand balance transactions from an accounting perspective. - `source` union — This transaction relates to the Stripe object. - … - `status` string, required — The transaction's net funds status in the Stripe balance, which are either `available` or `pending`. - `type` 'adjustment' | 'advance' | 'advance_funding' | 'anticipation_repayment' | 'application_fee' | 'application_fee_refund' | 'charge' | 'climate_order_purchase' | 'climate_order_refund' | 'connect_collection_transfer' | 'contribution' | 'fee_credit_funding' | 'inbound_transfer' | 'inbound_transfer_reversal' | 'issuing_authorization_hold' | 'issuing_authorization_release' | 'issuing_dispute' | 'issuing_transaction' | 'obligation_outbound' | 'obligation_reversal_inbound' | 'payment' | 'payment_failure_refund' | 'payment_network_reserve_hold' | 'payment_network_reserve_release' | 'payment_refund' | 'payment_reversal' | 'payment_unreconciled' | 'payout' | 'payout_cancel' | 'payout_failure' | 'payout_minimum_balance_hold' | 'payout_minimum_balance_release' | 'refund' | 'refund_failure' | 'reserve_hold' | 'reserve_release' | 'reserve_transaction' | 'reserved_funds' | 'stripe_balance_payment_debit' | 'stripe_balance_payment_debit_reversal' | 'stripe_fee' | 'stripe_fx_fee' | 'tax_fee' | 'tax_fund' | 'topup' | 'topup_reversal' | 'transfer' | 'transfer_cancel' | 'transfer_failure' | 'transfer_refund', required — Transaction type: `tax_fund`, `adjustment`, `advance`, `advance_funding`, `anticipation_repayment`, `application_fee`, `application_fee_refund`, `charge`, `climate_order_purchase`, `climate_order_refund`, `connect_collection_transfer`, `contribution`, `inbound_transfer`, `inbound_transfer_reversal`, `issuing_authorization_hold`, `issuing_authorization_release`, `issuing_dispute`, `issuing_transaction`, `obligation_outbound`, `obligation_reversal_inbound`, `payment`, `payment_failure_refund`, `payment_network_reserve_hold`, `payment_network_reserve_release`, `payment_refund`, `payment_reversal`, `payment_unreconciled`, `payout`, `payout_cancel`, `payout_failure`, `payout_minimum_balance_hold`, `payout_minimum_balance_release`, `refund`, `refund_failure`, `reserve_transaction`, `reserved_funds`, `reserve_hold`, `reserve_release`, `stripe_fee`, `stripe_fx_fee`, `stripe_balance_payment_debit`, `stripe_balance_payment_debit_reversal`, `tax_fee`, `topup`, `topup_reversal`, `transfer`, `transfer_cancel`, `transfer_failure`, `transfer_refund`, or `fee_credit_funding`. Learn more about [balance transaction types and what they represent](https://stripe.com/docs/reports/balance-transaction-types). To classify transactions for accounting purposes, consider `reporting_category` instead. - `charge` union, required — ID of the charge that the application fee was taken from. - string - Charge — The `Charge` object represents a single attempt to move money into your Stripe account. PaymentIntent confirmation is the most common way to create Charges, but [Account Debits](https://docs.stripe.com/connect/account-debits) may also create Charges. Some legacy payment flows create Charges directly, which is not recommended for new integrations. - `amount` integer, required — Amount intended to be collected by this payment. A positive integer representing how much to charge in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal) (e.g., 100 cents to charge $1.00 or 100 to charge ¥100, a zero-decimal currency). The minimum amount is $0.50 US or [equivalent in charge currency](https://docs.stripe.com/currencies#minimum-and-maximum-charge-amounts). The amount value supports up to eight digits (e.g., a value of 99999999 for a USD charge of $999,999.99). - `amount_captured` integer, required — Amount in cents (or local equivalent) captured (can be less than the amount attribute on the charge if a partial capture was made). - `amount_refunded` integer, required — Amount in cents (or local equivalent) refunded (can be less than the amount attribute on the charge if a partial refund was issued). - `application` union — ID of the Connect application that created the charge. - … - `application_fee` union — The application fee (if any) for the charge. [See the Connect documentation](https://docs.stripe.com/connect/direct-charges#collect-fees) for details. - … - `application_fee_amount` integer, nullable — The amount of the application fee (if any) requested for the charge. [See the Connect documentation](https://docs.stripe.com/connect/direct-charges#collect-fees) for details. - `balance_transaction` union — ID of the balance transaction that describes the impact of this charge on your account balance (not including refunds or disputes). - … - `billing_details` BillingDetails, required - … - `calculated_statement_descriptor` string, nullable — The full statement descriptor that is passed to card networks, and that is displayed on your customers' credit card and bank statements. Allows you to see what the statement descriptor looks like after the static and dynamic portions are combined. This value only exists for card payments. - `captured` boolean, required — If the charge was created without capturing, this Boolean represents whether it is still uncaptured or has since been captured. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `customer` union — ID of the customer this charge is for if one exists. - … - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `disputed` boolean, required — Whether the charge has been disputed. - `failure_balance_transaction` union — ID of the balance transaction that describes the reversal of the balance on your account due to payment failure. - … - `failure_code` string, nullable — Error code explaining reason for charge failure if available (see [the errors section](https://docs.stripe.com/error-codes) for a list of codes). - `failure_message` string, nullable — Message to user further explaining reason for charge failure if available. - `fraud_details` ChargeFraudDetails - … - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`. - `metadata` object, required — Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'charge', required — String representing the object's type. Objects of the same type share the same value. - `on_behalf_of` union — The account (if any) the charge was made on behalf of without triggering an automatic transfer. See the [Connect documentation](https://docs.stripe.com/connect/separate-charges-and-transfers) for details. - … - `outcome` ChargeOutcome - … - `paid` boolean, required — `true` if the charge succeeded, or was successfully authorized for later capture. - `payment_intent` union — ID of the PaymentIntent associated with this charge, if one exists. - … - `payment_method` string, nullable — ID of the payment method used in this charge. - `payment_method_details` PaymentMethodDetails - … - `presentment_details` PaymentFlowsPaymentIntentPresentmentDetails - … - `radar_options` RadarRadarOptions — Options to configure Radar. See [Radar Session](https://docs.stripe.com/radar/radar-session) for more information. - … - `receipt_email` string, nullable — This is the email address that the receipt for this charge was sent to. - `receipt_number` string, nullable — This is the transaction number that appears on email receipts sent for this charge. This attribute will be `null` until a receipt has been sent. - `receipt_url` string, nullable — This is the URL to view the receipt for this charge. The receipt is kept up-to-date to the latest state of the charge, including any refunds. If the charge is for an Invoice, the receipt will be stylized as an Invoice receipt. - `refunded` boolean, required — Whether the charge has been fully refunded. If the charge is only partially refunded, this attribute will still be false. - `refunds` object, nullable — A list of refunds that have been applied to the charge. - … - `review` union — ID of the review associated with this charge if one exists. - … - `shipping` Shipping - … - `source_transfer` union — The transfer ID which created this charge. Only present if the charge came from another Stripe account. [See the Connect documentation](https://docs.stripe.com/connect/destination-charges) for details. - … - `statement_descriptor` string, nullable — For a non-card charge, text that appears on the customer's statement as the statement descriptor. This value overrides the account's default statement descriptor. For information about requirements, including the 22-character limit, see [the Statement Descriptor docs](https://docs.stripe.com/get-started/account/statement-descriptors). For a card charge, this value is ignored unless you don't specify a `statement_descriptor_suffix`, in which case this value is used as the suffix. - `statement_descriptor_suffix` string, nullable — Provides information about a card charge. Concatenated to the account's [statement descriptor prefix](https://docs.stripe.com/get-started/account/statement-descriptors#static) to form the complete statement descriptor that appears on the customer's statement. If the account has no prefix value, the suffix is concatenated to the account's statement descriptor. - `status` 'failed' | 'pending' | 'succeeded', required — The status of the payment is either `succeeded`, `pending`, or `failed`. - `transfer` union — ID of the transfer to the `destination` account (only applicable if the charge was created using the `destination` parameter). - … - `transfer_data` ChargeTransferData - … - `transfer_group` string, nullable — A string that identifies this transaction as part of a group. See the [Connect documentation](https://docs.stripe.com/connect/separate-charges-and-transfers#transfer-options) for details. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `fee_source` PlatformEarningFeeSource - `charge` string — Charge ID that created this application fee. - `payout` string — Payout ID that created this application fee. - `type` 'charge' | 'payout', required — Type of object that created the application fee. - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`. - `object` 'application_fee', required — String representing the object's type. Objects of the same type share the same value. - `originating_transaction` union — ID of the corresponding charge on the platform account, if this fee was the result of a charge using the `destination` parameter. - string - Charge — The `Charge` object represents a single attempt to move money into your Stripe account. PaymentIntent confirmation is the most common way to create Charges, but [Account Debits](https://docs.stripe.com/connect/account-debits) may also create Charges. Some legacy payment flows create Charges directly, which is not recommended for new integrations. - `amount` integer, required — Amount intended to be collected by this payment. A positive integer representing how much to charge in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal) (e.g., 100 cents to charge $1.00 or 100 to charge ¥100, a zero-decimal currency). The minimum amount is $0.50 US or [equivalent in charge currency](https://docs.stripe.com/currencies#minimum-and-maximum-charge-amounts). The amount value supports up to eight digits (e.g., a value of 99999999 for a USD charge of $999,999.99). - `amount_captured` integer, required — Amount in cents (or local equivalent) captured (can be less than the amount attribute on the charge if a partial capture was made). - `amount_refunded` integer, required — Amount in cents (or local equivalent) refunded (can be less than the amount attribute on the charge if a partial refund was issued). - `application` union — ID of the Connect application that created the charge. - … - `application_fee` union — The application fee (if any) for the charge. [See the Connect documentation](https://docs.stripe.com/connect/direct-charges#collect-fees) for details. - … - `application_fee_amount` integer, nullable — The amount of the application fee (if any) requested for the charge. [See the Connect documentation](https://docs.stripe.com/connect/direct-charges#collect-fees) for details. - `balance_transaction` union — ID of the balance transaction that describes the impact of this charge on your account balance (not including refunds or disputes). - … - `billing_details` BillingDetails, required - … - `calculated_statement_descriptor` string, nullable — The full statement descriptor that is passed to card networks, and that is displayed on your customers' credit card and bank statements. Allows you to see what the statement descriptor looks like after the static and dynamic portions are combined. This value only exists for card payments. - `captured` boolean, required — If the charge was created without capturing, this Boolean represents whether it is still uncaptured or has since been captured. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `customer` union — ID of the customer this charge is for if one exists. - … - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `disputed` boolean, required — Whether the charge has been disputed. - `failure_balance_transaction` union — ID of the balance transaction that describes the reversal of the balance on your account due to payment failure. - … - `failure_code` string, nullable — Error code explaining reason for charge failure if available (see [the errors section](https://docs.stripe.com/error-codes) for a list of codes). - `failure_message` string, nullable — Message to user further explaining reason for charge failure if available. - `fraud_details` ChargeFraudDetails - … - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`. - `metadata` object, required — Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'charge', required — String representing the object's type. Objects of the same type share the same value. - `on_behalf_of` union — The account (if any) the charge was made on behalf of without triggering an automatic transfer. See the [Connect documentation](https://docs.stripe.com/connect/separate-charges-and-transfers) for details. - … - `outcome` ChargeOutcome - … - `paid` boolean, required — `true` if the charge succeeded, or was successfully authorized for later capture. - `payment_intent` union — ID of the PaymentIntent associated with this charge, if one exists. - … - `payment_method` string, nullable — ID of the payment method used in this charge. - `payment_method_details` PaymentMethodDetails - … - `presentment_details` PaymentFlowsPaymentIntentPresentmentDetails - … - `radar_options` RadarRadarOptions — Options to configure Radar. See [Radar Session](https://docs.stripe.com/radar/radar-session) for more information. - … - `receipt_email` string, nullable — This is the email address that the receipt for this charge was sent to. - `receipt_number` string, nullable — This is the transaction number that appears on email receipts sent for this charge. This attribute will be `null` until a receipt has been sent. - `receipt_url` string, nullable — This is the URL to view the receipt for this charge. The receipt is kept up-to-date to the latest state of the charge, including any refunds. If the charge is for an Invoice, the receipt will be stylized as an Invoice receipt. - `refunded` boolean, required — Whether the charge has been fully refunded. If the charge is only partially refunded, this attribute will still be false. - `refunds` object, nullable — A list of refunds that have been applied to the charge. - … - `review` union — ID of the review associated with this charge if one exists. - … - `shipping` Shipping - … - `source_transfer` union — The transfer ID which created this charge. Only present if the charge came from another Stripe account. [See the Connect documentation](https://docs.stripe.com/connect/destination-charges) for details. - … - `statement_descriptor` string, nullable — For a non-card charge, text that appears on the customer's statement as the statement descriptor. This value overrides the account's default statement descriptor. For information about requirements, including the 22-character limit, see [the Statement Descriptor docs](https://docs.stripe.com/get-started/account/statement-descriptors). For a card charge, this value is ignored unless you don't specify a `statement_descriptor_suffix`, in which case this value is used as the suffix. - `statement_descriptor_suffix` string, nullable — Provides information about a card charge. Concatenated to the account's [statement descriptor prefix](https://docs.stripe.com/get-started/account/statement-descriptors#static) to form the complete statement descriptor that appears on the customer's statement. If the account has no prefix value, the suffix is concatenated to the account's statement descriptor. - `status` 'failed' | 'pending' | 'succeeded', required — The status of the payment is either `succeeded`, `pending`, or `failed`. - `transfer` union — ID of the transfer to the `destination` account (only applicable if the charge was created using the `destination` parameter). - … - `transfer_data` ChargeTransferData - … - `transfer_group` string, nullable — A string that identifies this transaction as part of a group. See the [Connect documentation](https://docs.stripe.com/connect/separate-charges-and-transfers#transfer-options) for details. - `refunded` boolean, required — Whether the fee has been fully refunded. If the fee is only partially refunded, this attribute will still be false. - `refunds` object, required — A list of refunds that have been applied to the fee. - `data` FeeRefund[], required — Details about each object. - `has_more` boolean, required — True if this list has another page of items after this one that can be fetched. - `object` 'list', required — String representing the object's type. Objects of the same type share the same value. Always has the value `list`. - `url` string, required — The URL where this list can be accessed. - `id` string, required — Unique identifier for the object. - `metadata` object, nullable — Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'fee_refund', required — String representing the object's type. Objects of the same type share the same value. - `has_more` boolean, required — True if this list has another page of items after this one that can be fetched. - `object` 'list', required — String representing the object's type. Objects of the same type share the same value. Always has the value `list`. - `url` string, required — The URL where this list can be accessed. ## Other responses - `default` — Error response. --- [API](https://skmtc.net/stripe/apis/stripe-api-2.md) · [All operations](https://skmtc.net/stripe/apis/stripe-api-2/llms.txt) · [OpenAPI document](https://skmtc-service-staging.skmtc.workers.dev/v1/apis/stripe/stripe-api-2/versions/3653ad45bbec/schema)