v1
latestOpenAPI 3.0.02026-07-14643983.3 KBBeta: Gets all Meters available to activate as a Virtual Meter.
Beta: Gets all Meters available to activate as a Virtual Meter.
Response
OK
The Actvie Power or current flow rate
The Actvie Power Phase L1
The Actvie Power Phase L2
The Actvie Power Phase L3
The Unit of the Active Power Value
The Number of the Active Tariff
An additional Meter serial number. e.g. the number of a meter a smart-me device is connected to.
The analog output number 1 (PWM signal) (0 - 32183)
The analog output number 2 (PWM signal) (0 - 32183)
The state of a pico charging station. (Only available for pico charging stations)
The Meter Counter Reading (Total Energy used)
The Meter Counter Reading only export
The Meter Counter Reading only import
The Meter Counter Reading Tariff 1
The Meter Counter Reading Tariff 2
The Meter Counter Reading Tariff 3
The Meter Counter Reading Tariff 4
The Unit of the Counter Reading
The Current (in A)
The Current Phase L1 (in A)
The Current Phase L2 (in A)
The Current Phase L3 (in A)
The Energy Type of this device
The digital input number 1
The digital input number 2
The digital output number 1
The digital output number 2
The Family Type of the device.
The current flow rate (e.g. m3/h)
The ID of the device
The sub meter type (e.g. warmwater or coldwater)
The Name of the Device
The Power Factor (cos phi). Range: 0 - 1
The Power Factor (cos phi) Phase L1. Range: 0 - 1
The Power Factor (cos phi) Phase L2. Range: 0 - 1
The Power Factor (cos phi) Phase L3. Range: 0 - 1
The Serial number
Flag if the Switch is on on this device.
Flag if the Phase L1 is on on this device.
Flag if the Phase L2 is on on this device.
Flag if the Phase L3 is on on this device.
The Temperature (in degree celsius)
Time of last successful connection the the smart-me Cloud.
The Voltage (in V)
The Voltage Phase L1 (in V)
The Voltage Phase L2 (in V)
The Voltage Phase L3 (in V)