Update channel selection settings
Update the channel selection settings belonging to a radio profile.
Path parameters
The channel selection settings ID.
Request body
Whether to dynamically select and switch channels based on the defined criteria.
The channel frequency range
Whether dynamic frequency selection is enabled (a/n, a, ac mode)
Whether static channel is enabled (manual channel selection return)
Whether ZeroWait DFS is enabled
Whether to use the last known power and channel during the AP boot up process
The comma-separated list of excluded channels not on the selected channel width.
The comma-separated list of excluded channels on the selected channel width.
The number of channel selections or AUTO for default selection.
Whether to allow for limiting the channel selection to non-overlapping channels. (b/g,g/n/, axes modes)
The channel region -- "USA", "Canada", "Europe", or "World"
The number of channel models to limit.
The comma separated list of channels allowed channel switching
Whether to enable automatic channel switching during specified time interval.
The start time for channel switching in 24-hr time format of hh:mm
The end time for channel switching in 24-hr time format of hh:mm
Whether to avoid channel switching if there are already max connected clients
The maximum number of connected clients to avoid switching
Whether to enable channel switching when RF interference exceeds the threshold
The RF interference threshold for channel switching.
The CRC error threshold for channel switching.
Response
OK
The unique identifier
The create time in UTC (ISO 8601 format)
The last update time in UTC (ISO 8601 format)
Whether to dynamically select and switch channels based on the defined criteria.
The channel frequency range
Whether dynamic frequency selection is enabled (a/n, a, ac mode)
Whether static channel is enabled (manual channel selection return)
Whether ZeroWait DFS is enabled
Whether to use the last known power and channel during the AP boot up process
The comma-separated list of excluded channels not on the selected channel width.
The comma-separated list of excluded channels on the selected channel width.
The number of channel selections from 1 up to 165 or AUTO for default selection.
Whether to allow for limiting the channel selection to non-overlapping channels. (b/g,g/n/, axes modes)
The channel region -- "USA", "Canada", "Europe", or "World"
The number of channel models to limit.
The comma separated list of channels allowed channel switching
Whether to enable automatic channel switching during specified time interval.
The start time for channel switching in 24-hr time format of hh:mm
The end time for channel switching in 24-hr time format of hh:mm
Whether to avoid channel switching if there are already max connected clients
The maximum number of connected clients from 0 up to 100 to avoid switching
Whether to enable channel switching when RF interference exceeds the threshold
The RF interference threshold from 10 up to 80 for channel switching.
The CRC error threshold from 10 up to 80 for channel switching.